Classified Info

Ford BDA BDG Alloy engine block 2 litre race rally

Advert ID: 44423 £2,850 GBP

Advert Began: Sep 15, 2020, 15:35
Number of Times Viewed: 1093
  • DSC06554.JPG
  • DSC06555.JPG
  • DSC06556.JPG
  • DSC06557.JPG
  • DSC06558.JPG
  • DSC06559.JPG
  • DSC06560.JPG
  • DSC06561.JPG
  • DSC06562.JPG
  • DSC06563.JPG


I have for a sale the pictured 2 litre (90mm bore) BDG alloy engine block, purchased from Bluesky engineering (KAM developments) the block is less than 12 months old and started life as a nikasil block sadly due to a problem with a cod rod the engine began to knock heavily at low revs on the dyno, on inspection the number 1 conrod had failed, this left the bore scored and some scuff marks in the block, most of these polished out but you can see the marks in the pictures, I then sent the block to Capricorn to have new liners fitted, this all took quite a bit of time to bet sorted so I had to buy another in the mean time hence this is for sale, the block has been line bore checked and all is perfect, the bores are all honed and have the new liners fitted, it is suit the standard big end bearings. The block has the "FORD" cast into it, it is to suit a car using a dry sump system. Any questions please call 07974 330159.

Seller Info

David Billingham

Member Since:
27 Nov 2014


Phone: 44 7974330159

Print Friendly printer friendly

Tell-a-Friend tell-a-friend

Add-to-Favorites add-to-favorites

Report Abuse Report Abuse

Report Sold Report Sold

Seller Notes

Seller Accepts:
Bank Transfer, Cash on Collection